Hcopy Subsystem Commands - HP 86140A Series User Manual

HCOPy Subsystem Commands

HCOPy:DATA?
Returns the currently defined printer output as an indefinite length block.
After removing the #0 prefix and newline suffix, this block can be saved by the
controller and sent directly to a suitable printer.
HCOPy:DESTination "SYSTem:COMMunicate:INTernal"|"SYStem:COMMunicate:CENtronics"
HCOPy:DESTination?
Selects the I/O port for hard copy output. This affects subsequent presses of
the Print key and the HCOPy[:IMMediate] command.
HCOPy[:IMMediate]
The entire screen is output to the port defined by the HCOPy:DESTination
command. This is equivalent to pressing the Print key.
Remote Operation
HCOPy Subsystem Commands
4-77