Adsl Profile Show Command Example; Adsl Profile Set Command Example; Figure 202 Adsl Profile Show Command Example; Figure 203 Adsl Profile Set Command Example 1 - ZyXEL Communications IES-1248-51V User Manual

Chapter 64 ADSL Commands

64.3.1 ADSL Profile Show Command Example

The following example displays the ADSL DEFVAL profile.

Figure 202 ADSL Profile Show Command Example

ras> adsl profile show DEFVAL
01. DEFVAL
max rate
min rate
latency delay (ms):
max margin
min margin
target margin (db):
up shift margin(db):
down shift margin(db):

64.3.2 ADSL Profile Set Command Example

The following example creates a premium profile (named "gold") for providing
subscribers with very high connection speeds and no interleave delay. It also sets
the upstream target signal/noise margin to 5 db, the upstream minimum
acceptable signal/noise margin to 0 db, the upstream maximum acceptable
signal/noise margin to 30 db, the upstream minimum ADSL transmission rate to
128 Kbps, the downstream target signal/noise margin to 5 db, the downstream
minimum acceptable signal/noise margin to 0 db, the downstream maximum
acceptable signal/noise margin to 30 db and the downstream minimum ADSL
transmission rate to 256Kbps.
The upstream down shift noise margin is 0 dB. The upstream up shift noise margin
is 6 dB. The downstream down shift noise margin is 0 dB. The downstream up
shift noise margin is 6 dB.

Figure 203 ADSL Profile Set Command Example 1

ras> adsl profile set gold fast 1200 24000 5 0 30 128 5 0 30 256 0 6 0 6
This next example creates a similar premium profile (named goldi), except it sets
an interleave delay of 16 ms for both upstream and downstream traffic.

Figure 204 ADSL Profile Set Command Example 2

ras> adsl profile set goldi interleave=16,16 1200 24000 5 0 30 128 5 0 30 256
0 6 0 6
504
latency mode: interleave
up stream down stream
--------- -----------
(kbps): 512
(kbps): 32
4
(db): 31
(db): 0
6
9
3
2048
32
4
31
0
6
9
3
IES-1248-51V User's Guide