Authentication Screen; Figure 46 Authentication; Table 15 User Account - ZyXEL Communications IES-1248-51V User Manual

12.2 Authentication Screen

Use this screen to set up the authentication policies and settings by which
administrators can access the IES.
To open this screen, click Basic Setting > User Account > Authentication.

Figure 46 Authentication

The following table describes the labels in this screen.

Table 15 User Account

LABEL
User account
Authentication
Mode
IP
Port
IES-1248-51V User's Guide
DESCRIPTION
Click this to open the User Account screen. See
page 117.
Select the process by which the IES authenticates administrators.
local - Search the local database. You maintain this database in the
User Account screen.
radius - Check an external RADIUS database using the settings
below.
local then radius - Search the local database; if the user name is
not found, check an external RADIUS database using the settings
below.
Enter the IP address of the external RADIUS server in dotted decimal
notation.
The default UDP port of the RADIUS server for authentication is
1812. You need not change this value unless your network
administrator instructs you to do so.
Chapter 12 User Account
Section 12.1 on
119