C
H A P T E R
This chapter describes the Static Multicast screen.
21.1 Static Multicast
Use static multicast to allow incoming frames based on multicast MAC address(es)
that you specify. This feature can be used in conjunction with IGMP snooping/
proxy to allow multicast MAC address(es) that are not learned by IGMP snooping
or IGMP proxy. Use static multicast to pass routing protocols, such as RIP and
OSPF.
21.2 Static Multicast Screen
To open this screen, click Advanced Application > Static Multicast.
Figure 85 Static Multicast
IES-1248-51V User's Guide
Static Multicast
21
199