Ip Bridge Downlink Interface Set Command Example; Ip Bridge Downlink Interface Show Command Example; Table 179 Ip Bridge Downlink Interface Commands - ZyXEL Communications IES-1248-51V User Manual

Hd digital surveillance monitor
Hide thumbs Also See for IES-1248-51V:
Table of Contents

Advertisement

Chapter 62 IP Bridge Commands
VLAN ID to identify the domain the downlink interface is in. Downlink interfaces in
the same domain cannot have overlapping IP addresses.

Table 179 IP Bridge Downlink Interface Commands

COMMAND
adsl ipbpvc interface set
<ip-address>/<mask-bits>
<vlan-id> [<port> <vpi>
<vci>]
adsl ipbpvc interface show
[<ip-address>/<mask-bits> |
<vlan-id> | <ip-address>/
<mask-bits> <vlan-id>]
adsl ipbpvc interface runtime
[<ip-address>/<mask-bits> |
<vlan-id> | <ip-address>/
<mask-bits> <vlan-id>]
adsl ipbpvc interface delete
<ip-address>/<mask-bits>
<vlan-id>

62.5.1 IP Bridge Downlink Interface Set Command Example

The following example creates a downlink interface that forwards frames for IP
addresses 192.168.3.0~192.168.3.255 to VLAN 402.
ras> adsl ipbpvc interface set 192.168.3.0/24 402

62.5.2 IP Bridge Downlink Interface Show Command Example

This example displays the downlink interfaces created manually.
ras> adsl ipbpvc interface show 200
ip/netmask
------------------ ---- ---- --- -----
1.2.3.0/24
3.3.3.3/32
192.168.1.33/32
192.168.1.64/28
480
DESCRIPTION
Creates the specified downlink interface. The <ip-
address>/<mask-bits> specifies the IP address and
subnet mask of the VLAN or subscriber. If the destination
IP address of a packet is in this range, the IES forwards
the frame to the specified VLAN and PVC, if any.
The IES uses the specified VLAN ID when it forwards
frames to the VLAN or subscriber. It also uses the VLAN ID
to identify the domain the downlink interface is in.
Make sure you specify a valid IP bridge PVC. Do not
specify PVCs that are not defined in the IPB PVC screen in
Section 62.6 on page
482.
This command displays downlink interfaces created
manually. It does not show forwarding information learned
by snooping DHCP packets.
Displays the (run-time) downlink interfaces for the
selected range of IP addresses and/or VLAN. This table
includes all the forwarding information for downstream
traffic, whether learned by snooping DHCP packets or
provided manually.
Deletes the specified downlink interface. You can only
remove downlink interfaces that were added manually.
vid port vpi
vci
200
20 200
200
200
1
6
6
200
-
-
-
200
2
0
35
P
H/H
M/L
M/L
H/H
IES-1248-51V User's Guide

Advertisement

Table of Contents
loading

Table of Contents