Toggle Credentials - Schlage AD-200 User Manual

Note: Before creating any credential in the following steps, determine which
L
credential form is desired (see Credential forms on page 6).

TOGGLE credentials

To complete
this action:
Create a
Programming
Toggle
PIN and
PIN
Present
Programming
Create a
Programming
Toggle
PIN and
CARD
Present
Programming
Create
Programming
a Toggle
PIN and
CARD +
Card ID
Number
Present
Programming
Wait for
1
2
Enter Enter
OR
card
Enter Enter
OR
card
Enter Enter
OR
card
Perform the following steps:
to stop flashing between each step!
3
Enter Enter new
3-6 digit
PIN and
Wait for
right green
light.
Enter Enter new
3-6 digit
Card ID
Number
and
Wait for
right green
light.
Enter Enter new
3-6 digit
Card ID
Number
and
Wait for
right green
light.
4 5
For
another
PIN, go
back to
step 3
OR
press
again
to finish
Present
new
CARD to
lock.
Present
new
CARD to
lock.
9 • Schlage • AD-200 user guide
6
Wait for
confirmation:
2 right green
blinks.
For another
CARD, go back
to step 3
OR press
again to finish
Wait for
confirmation:
2 right green
blinks.
For another
CARD+Card ID
credential, go
back to step 4
OR press
again to finish
Wait for
confirmation:
2 right green
blinks.