Pass Through Credentials - Schlage AD-200 User Manual

Note: Before creating any credential in the following steps, determine which
L
credential form is desired (see Credential forms on page 6).

PASS THROUGH credentials

To complete
this action:
Create a
Programming
Pass
PIN and
Through
PIN
Present
Programming
Create a
Programming
Pass
PIN and
Through
CARD
Present
Programming
Create a
Programming
Pass
PIN and
Through
CARD +
Card ID
Present
Number
Programming
Wait for
1
2
Enter Enter
OR
card
Enter Enter
OR
card
Enter Enter
OR
card
Perform the following steps:
to stop flashing between each step!
3 4
Enter Enter new
3-6 digit
PIN and
Wait for
right green
light.
Enter Enter new
3-6 digit
Card ID
Number
and
Wait for
right green
light.
Enter Enter new
3-6 digit
Card ID
Number
and
Wait for
right green
light.
5
For Wait for
another confirmation:
PIN, go 2 right green
back to blinks.
step 3
OR
press
again to
finish
Present For another
new CARD, go back to
CARD to step 3
lock.
OR press
again to finish
Wait for
confirmation:
2 right green
blinks.
Present For another
new CARD+Card ID
CARD to credential, go
lock. back to step 4
OR press
again to finish
Wait for
confirmation:
2 right green
blinks.
11 • Schlage • AD-200 user guide
6