Date Setup; Multi-Camera - COMPRO NC420 User Manual

Compro NC420 / NC450

Date Setup

Here displays the current time information stored in your IP camera, and you can set up the Time Zone for
your current region or country, get time information from NTP server, and synchronize the clock of your
camera system with your PC or manually adjust system clock.

Multi-Camera

Here you can add, modify, or delete additional IP cameras on your camera list, and later switch between
camera channels listed here on LiveView screen. When you add a new IP camera, you need to input the
required information into the IP address, username, and password field (port numbers may be required if
they have been set differently). After pressing the [Save] button, you will see the status of the cameras on the
list. To modify an existing camera, simply choose a camera from the list and click [Modify].
6-18 Date Setup & Multi-Camera
Figure 6-14. Multi-Camera setting