Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Inspiron 17 5000 Service Manual

Removing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the battery.
2 Remove the base
3 Follow the procedure from step 1 to step 3 in
4 Remove the wireless
5 Remove the memory
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 4 in
8 Follow the procedure from step 1 to step 6 in
9 Remove the I/O
10 Remove the heat-sink
11 Remove the system

Procedure

1 Note the power-adapter-port cable routing and remove it from the routing
guides on the palm-rest assembly.
2 Remove the screw that secures the power-adapter port to the palm-rest
assembly.
3 Peel off the tape that secures the power-adapter port to the palm-rest
assembly.
computer. After working inside your computer, follow
After working inside your
cover.
card.
modules.
board.
assembly.
board.
computer. For more safety best
www.dell.com/
"Removing the hard
"Removing the optical
"Removing the computer
Before
drive".
drive".
base".
73