Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Inspiron 17 5000 Service Manual

Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Slide the power-button board under the tabs on the palm rest and align the
screw hole on the power-button board with the screw hole on the palm-rest
assembly.
2 Replace the screw that secures the power-button board to the palm-rest
assembly.
3 Adhere the power-button board cable to the palm-rest assembly.
4 Adhere the tape that secures the power-button board to the palm-rest
assembly.

Post-requisites

1 Replace the display
2 Replace the power-adapter
3 Replace the system
4 Replace the heat-sink
5 Replace the I/O
6 Follow the procedure from step 3 to step 8 in
7 Follow the procedure from step 4 to step 7 in
8 Replace the keyboard.
9 Replace the memory
10 Replace the wireless
computer. After working inside your computer, follow
After working inside your
assembly.
port.
board.
assembly.
board.
modules.
card.
computer. For more safety best
www.dell.com/
"Replacing the computer
"Replacing the optical
Before
base".
drive".
83