Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 17 5000 Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Slide the I/O-board cable into the I/O-board cable connector and press down
the latch to secure the cable.
2 Turn the I/O board over and align the screw hole on the I/O board with the
screw hole on the palm-rest assembly.
3 Replace the screw that secures the I/O board to the palm-rest assembly.

Post-requisites

1 Follow the procedure from step 3 to step 8 in
2 Follow the procedure from step 4 to step 7 in
3 Replace the keyboard.
4 Replace the wireless
5 Follow the procedure from step 4 to step 6 in
6 Replace the base
7 Replace the battery.
computer. After working inside your computer, follow
After working inside your
card.
cover.
computer. For more safety best
www.dell.com/
"Replacing the computer
"Replacing the optical
"Replacing the hard
Before
base".
drive".
drive".
57