Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell Inspiron 17 5000 Service Manual

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Slide the power-adapter port into the slot on the palm-rest assembly.
2 Replace the screw that secures the power-adapter port to the palm-rest
assembly.
3 Route the power-adapter-port cable through the routing guides on the palm-
rest assembly.
4 Adhere the tape that secures the power-adapter port to the palm-rest assembly.

Post-requisites

1 Replace the system
2 Replace the heat-sink
3 Replace the I/O
4 Follow the procedure from step 3 to step 8 in
5 Follow the procedure from step 4 to step 7 in
6 Replace the keyboard.
7 Replace the memory
8 Replace the wireless
9 Follow the procedure from step 4 to step 6 in
10 Replace the base
11 Replace the battery.
computer. After working inside your computer, follow
After working inside your
board.
assembly.
board.
modules.
card.
cover.
computer. For more safety best
www.dell.com/
"Replacing the computer
"Replacing the optical
"Replacing the hard
Before
base".
drive".
drive".
75