Siemens Milltronics BW500 Operating Instructions Manual page 57

Press the following keys in a sequence:
P015-01 Speed Constant
Pulses/m
Note: If the speed input is configured for constant speed, display value reads 'Jumpered'.
Press the following key to advance:
If the speed input is connected to a speed sensor, pressing enter at P015 invokes P690 for data
entry. Press the following key:
P690-01 Speed Constant Entry
1-Calculated, 2-Sensor Data
BW500 and BW500/L
Operating Instructions, 12/2016, A5E33482052-AD
6.3 Initial Start Up
V
0.0000
E
1
Start Up
55