Siemens Milltronics BW500 Operating Instructions Manual page 21

Communications
Two RS232 ports
One RS485 port (isolated)
SmartLinx compatible (see Options below)
Cable
One load cell
Two/four/six load cells
1)
Speed sensor
Auto zero
Remote total
For four or six load cell scales, run two separate cables of the two load cell configuration. Four/six load cells not availa-
1)
ble with BW500/L.
Options
mA I/O board
1)
BW500 and BW500/L
Operating Instructions, 12/2016, A5E33482052-AD
Non-sensing
•
Sensing
•
Non-sensing
•
Sensing
•
Speed Sensor
•
Dolphin Plus
•
SmartLinx Modules
•
Inputs
•
Outputs
•
4 wire shielded, 20 AWG or equivalent, 150 m (500 ft.)
max.
6 wire shielded, 20 AWG or equivalent, 300 m (1000 ft.)
max.
6 wire shielded, 20 AWG or equivalent, 150 m (500 ft.)
max.
8 wire shielded, 20 AWG or equivalent, 300 m (1000 ft.)
max.
3 wire shielded, 18 AWG or equivalent, 300 m 1000 ft.)
1 pair, twisted/shielded, 18 AWG, 300 m (1000 ft.) max.
1 pair, twisted/shielded, 18 AWG, 300 m (1000 ft.) max.
Siemens MD-36/36A/256 or 2000A, RBSS, TASS,
WS100, or WS300, or compatible
Siemens Windows based software interface (refer to as-
sociated product documentation)
protocol specific modules for interface with popular indus-
trial communications systems (refer to associated product
documentation)
2 programmable 0/4 ...20 mA for PID, control, incline,
•
and moisture compensation, and online calibration
Isolated
•
0.1 % of 20 mA resolution
•
200 Ω input impedance
•
2 programmable 0/4 ... 20 mA for PID control, rate,
•
load, and speed output
Isolated
•
0.1% of 20 mA resolution
•
750 Ω load max.
•
Specifications
19