Enable Cisco Ucm App Client; Create End User To Log In To Ucm App; Subscribe User With Ucm App - Cisco DX650 Administration Manual

Configure Product-Specific Options
not specified, the device will search for an updated Android application package file (APK) on site each time.
Blank versionCode is useful during development of application. The versionCode is an integer and is different
than the versionName that users can view from the Settings application.
When you upgrade system applications, including those bundled with the firmware, the versionCode of
Note
the Cisco Unified Communications Manager Administration-provisioned application must be greater than
the versionCode of the system application.

Enable Cisco UCM App Client

Procedure
Step 1 In the Product Specific Configuration Layout portion of the Device Configuration window of a device, check
the Enable Cisco UCM App Client check box.
Step 2 Click Save.
Step 3 Click Apply Config.
This action installs the UCM App client on the device.
After the UCM App client is installed on the device, the device user can subscribe or unsubscribe to applications
that are created in Cisco Unified Communications Manager by logging in to the UCM App client.

Create End User to Log in to UCM App

The administrator must create an end user, associate the end user with the device, and assign the end user as
device owner before the end user can log in to the UCM App.
Procedure
Step 1
Create an end user. (In Cisco Unified Communications Manager Administrator, select User Management >
End User to create a new end user.)
Step 2 Associate the device with the end user, so that the device is displayed under Controlled Devices for the end
user.
Step 3 Assign the Standard CCM End User permissions to the end user.
Step 4 In the Device Configuration window for the device, assign this end user in the Owner User ID field.

Subscribe User with UCM App

A device user follows this procedure to subscribe or unsubscribe applications that were created on Cisco
Unified Communications Manager by using the UCM App on the device.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
144