Voip Wlan Deployment; Supported Access Points - Cisco DX650 Administration Manual

Cisco AP configuration
EAP-FAST
802.1X
EAP-FAST with WPA
EAP-FAST with WPA2
WPA-PSK
WPA2-PSK
For additional information about Cisco WLAN Security, see
wireless/ps430/prod_brochure09186a00801f7d0b.html.
For more information about configuring authentication and encryption schemes on APs, see the Cisco Aironet
Configuration Guide for your model and release under the following URL:
http://www.cisco.com/cisco/web/psa/configure.html?mode=prod&level0=278875243
Related Topics
Cisco Unified Wireless AP Interactions, on page 82
Authentication Methods, on page 86
Encryption Methods, on page 91
Cisco Unified Communications Manager Interaction, on page 86
VoIP Wireless Network Components, on page 82
VoIP WLAN Deployment, on page 93

VoIP WLAN Deployment

This section provides configuration guidelines for deploying Cisco Desktop Collaboration Experience devices
in the WLAN.

Supported Access Points

The Cisco Desktop Collaboration Experience is supported on both the Cisco autonomous and unified solutions.
Minimum and recommended versions are:
• Cisco IOS Access Points (Autonomous)
Optional CCKM
WPA
Optional CCKM
WPA2
WPA-PSK
WAP2-PSK
◦ Minimum = 12.3(8)JEA2 or later
◦ Recommended = 12.4(10b)JA3 or later (Does not apply to Cisco Aironet Series 1100, 1140, 1200,
or 1230).
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
VoIP WLAN Deployment
Cisco Desktop Collaboration
Experience configuration
WEP EAP-FAST
TKIP EAP-FAST
AES EAP-FAST
TKIP Auto (AKM)
AES Auto (AKM)
http://www.cisco.com/en/US/products/hw/
93