Cisco DX650 Administration Manual page 120

Wireless and Networks Settings Menu
Option
Scan
Add network
Network SSID
Security
Advanced
Network notification
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
102
Description
Scans for available Wi-Fi networks.
Adds Wi-Fi network.
Specifies the Service Set Identifier
(SSID), a unique identifier for accessing
wireless access points.
The type of authentication that Cisco
Desktop Collaboration Experience uses
to access the WLAN. Valid values:
• None
• WEP
• WPA/WPA2 PSK
• 802.1X EAP
Supported 802.1X EAP
Note
methods are PEAP, TLS and
FAST. Server validation for
PEAP is not supported. For a
detailed explanation of wireless
security, see the Cisco Desktop
Collaboration Experience
DX600 Series Wireless LAN
Deployment Guide.
Notifies the user when an open network
is available.
To select or change
Tap Scan to scan for available Wi-Fi
networks.
To add a network, select from
broacasted/available WLANs or select Add
network to manually add network.
For broadcasted/available
Note
networks, enter Password, if
applicable, and select Frequency
band. For new networks, enter
Network SSID, Security, and
Frequency band.
1 Tap and hold Wi-Fi network to change.
2 Select Modify network.
3 Enter SSID.
4 Tap Save.
1 Choose Wi-Fi > Add network.
2 Select Security.
3 Select Security option.
4 Tap Save.
Tap to enable or disable notification.