Screen Lock And Automatic Lock Setup; Set Up Screen Unlock/Password Reset - Cisco DX650 Administration Manual

Screen Lock and Automatic Lock Setup

The Screen Lock Timeout value controls the normal device idle timeout when the screen turns off and the
screen lock is activated. The variable is configurable within a range of 1 to 60 minutes.
The Automatic Lock controls how long the display will stay on before dimming or going off. If Cisco Desktop
Collaboration Experience is in the Always On mode, the device will dim. If Cisco Desktop Collaboration
Experience is in the Nightlight mode, it will turn off completely. The Automatic Lock value is configurable
up to a maximum value of 10 minutes. To configure the Automatic Lock value on a Cisco Desktop Collaboration
Experience device, go to Settings > Security > Automatically lock after work hours.
The following table shows the relationship of the Screen Lock Timeout value and Automatic Lock value.
Table 32: Screen Lock and Automatic Lock Value Relationship
Condition
Screen Lock Timeout value is lower than Automatic
Lock value
Automatic Lock value is lower than Screen Lock
Timeout value
Screen Lock Timeout value the same as the Automatic
Lock value

Set Up Screen Unlock/Password Reset

This feature allows the user to reset the PIN/password that is used for unlocking the screen. The user can reset
the PIN/password by using Cisco Unified Communications Manager or configured Google account credentials.
Use the following procedure to reset the PIN/password using Cisco Unified Communications Manager.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
Configure Product-Specific Options
Outcome
When the Screen Lock Timeout value is reached,
screen stays at full brightness; locked screen displays.
When the Automatic Lock value is reached, two
outcomes are possible:
• If Cisco Desktop Collaboration Experience is
in Always On mode, the device will dim when
the Automatic Lock value is reached. When the
Screen Lock Timeout value is reached, the
device will lock and remain dimmed.
• If Cisco Desktop Collaboration Experience is
in Nightlight mode, the device will lock and
turn off when the Automatic Lock value is
reached. When the Screen Lock Timeout value
is reached, no additional changes occur.
When the value is reached, screen stays at full
brightness; locked screen displays.
139