Record - EverFocus EMV800 HD User Manual

7.3.2

Record

You can configure the basic recording settings.
Record Overwrite: Check the box to overwrite the hard disk / SD card when it is full. Note that
unless this box is checked, or the mobile DVR will stop recording when the hard disk / SD card
is full. The use of record overwrite is strongly recommended. If you do not use this feature,
please be sure to enable the Event setting for Disk Full for notification (see 7.3.3.6 Other). For
SD card, when the card is full, the "SD Card Disk Full" message will automatically pop-up.
Schedule Record: Check the box to record by the schedule to the hard disk. Please see .7.3.7
Schedule Setting for more details.
Time Stamp: Select Top / Bottom to overlay time information on the top / bottom of the
recording streams. Select Off to disable the function.
Record Status Relay Output: Select a number to monitor the recording status of the selected
alarm relay. The recording status of the selected alarm relay will be transmitted to the alarm
output device.
Power Delay-On: Set the delay time to supply power to the mobile DVR in order to avoid
excess consumption surge at ignition.
Power Delay-Off: Set the delay time to power off the mobile DVR after ignition off. It can
extend the recording time after ignition off.
Save: Click to save the settings.
EMV800 HD / EMV1200 HD Mobile DVR
151