Basic Information - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.1

Basic information

The HDDs or SSDs which can be ordered for your server are supplied already
mounted in an installation frame so that defective drives can be replaced and
new drives can be added during operation. The HDD or SSD and the installation
frame together make up the HDD module or SSD module.
I
For information on RAID controllers controlling the HDD/SSD modules
see chapter
I
Please refer to section
page 155 and section
complete overview of the mounting sequence.
I
In the following sections the figures are shown for the RX2560 M2.
The only difference to a TX2560 M2 in horizontal position: the accessible
drive cage is turned around clockwise for 90 degrees.
Figure 68: Example RX2560 M2
Figure 69: Example TX2560 M2 in horizontal position
154
"Expansion cards and backup units" on page
"2.5-inch HDD/SSD/PCIe SSD configurations" on
"3.5-inch HDD configurations" on page 206
Upgrade and Maintenance Manual
289.
for a
TX2560 M2 / RX2560 M2