Concluding Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Connecting front panel cables to the system board
Figure 328: Connecting front panel cables to the system board
Ê Run the front panel cables through the cable guide (A).
Ê Connect the front panel cable to the system board (1).
Ê If applicable, connect the front VGA cable to the system board (2).
Ê Connect the front USB cable to the system board (3).

13.1.6 Concluding steps

"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
"Verifying system information backup / restore" on page 121
Ê
Ê Store your server's system information on the Chassis ID EPROM
integrated into the front panel board:
page 139
TX2560 M2 / RX2560 M2
Front panel and external connectors
"Using the Chassis ID Prom Tool" on
Upgrade and Maintenance Manual
A
441