Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual page 562

Appendix
iRMC-related status signals
Global error
ID indicator
indicator
blue flashing off
blue flashing orange flashing
I
For further information please refer to section
the iRMC" on page
HDD prefailure detection
Depending on your hardware configuration HDD prefailure will be supported.
The requirements are:
– iRMC Firmware 7.14 or later
– supported OOB system
– dedicated RAID controller
Not supported RAID controllers
D2616/MegaRAID SAS 9280-8e
D3116/D3116C
Table 8: Not supported RAID controllers
562
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
119.
MegaRAID SAS9285CV-8e
D2607
Upgrade and Maintenance Manual
"Updating or recovering
TX2560 M2 / RX2560 M2