Omron C200HE-CPU11 Installation Manual page 24

Basic Configuration
Model
C200HE-CPU11-E/ZE Not supported
C200HE-CPU32-E/ZE 10 Units
C200HE-CPU42-E/ZE 10 Units
C200HG-CPU33-E/ZE 10 Units
C200HG-CPU43-E/ZE 10 Units
C200HG-CPU53-E/ZE 16 Units
C200HG-CPU63-E/ZE 16 Units
C200HX-CPU34-E/ZE 10 Units
C200HX-CPU44-E/ZE 10 Units
C200HX-CPU54-E/ZE 16 Units
C200HX-CPU64-E/ZE 16 Units
C200HX-CPU65-ZE 16 Units
C200HX-CPU85-ZE 16 Units
CPU Backplane
Other Units
12
Max. No. of Group-2
High-density I/O Units
64-point Units
(see note 1)
Not supported
5 Units
5 Units
5 Units
5 Units
8 Units
8 Units
5 Units
5 Units
8 Units
8 Units
8 Units
8 Units
Note 1. Each 64 I/O Unit is treated as two Units.
2. Special I/O Units like the C200H-NC211 that are allocated the words for two
Units are treated as two Units.
3. Unit number settings for Group-2 Units for the following CPU Units must be
between 0 and 9:
C200HE-CPU32/42-E/ZE
C200HG-CPU33/43-E/ZE
C200HX-CPU34/44-E/ZE
The CPU Backplane is required to mount the CPU Unit and other Units compos-
ing the CPU Rack. The following CPU Backplanes are available depending on
the number of slot required for Units. Refer to 2-2-5 Backplanes for further
details.
Model
C200HW-BC031
C200HW-BC051
C200HW-BC081-V1 8
C200HW-BC101-V1 10
Note When using the C200HW-PA209R Power Supply Unit with an 8-slot or 10-slot
CPU Backplane or Expansion I/O Backplane, be sure to use the C200HW-
BC081-V1 or C200HW-BC101-V1.
The other Units that can be mounted to the CPU Rack include the Standard I/O
Units, High-density I/O Units, and Special I/O Units.
Max. No. of RS-232C
Special I/O Spec a /O
Units i
(see note 2)
10 Units No
10 Units No
10 Units Yes
10 Units No
10 Units Yes
16 Units No
16 Units Yes
10 Units No
10 Units Yes
16 Units No
16 Units Yes
16 Units Yes
16 Units Yes
Number of slots
3
5
Section 2-1
Clock Communications
(RTC) ( C) Board oa d
No No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes