Omron C200HE-CPU11 Installation Manual page 114

Standard Models
Name
ID Sensor Units
Read/Write Heads
Data Carriers
Voice Unit (see note 3)
Connecting Cable
Note: 1. When mounting a High-density I/O Unit as a Special I/O Unit to a Slave Rack, the Remote I/O Master
must be the C200H-RM001-PV1 or C200H-RM201.
2. The CV-series Programming Console can be used as a Teaching Box by replacing the Memory Pack of
the Programming Console.
3. Observe the following points when using the C200H-OV001 Voice Unit:
• The C200H-OV001 Voice Unit cannot be used when an OMRON display device (Programmable Termi-
nal) is connected to the peripheral port or the RS-232C port of a C200HX/HG/HE(-Z) CPU Unit in NT Link
mode. Connect the Programmable Terminal to the serial communications port of a C200HW-COMjj
Communications Board.
• When using a C200H-OV001 Voice Unit mounted on the PC, set the baud rate of the CPU Unit's periph-
eral port or RS-232C port to 9,600 bps or less (regardless of the serial communications mode).
102
Specifications
Local application, electromagnetic coupling
Remote application; microwave transmissions
Electromagnetic type
Microwave type
SRAM type for V600-H series.
EEPROM type for V600-H series.
60 messages max.; message length: 32, 48, or 64 s
(switchable)
RS-232C
Appendix A
Model number
C200H-IDS01-V1
C200H-IDS21
V600-H series
V620-H series
V600-DjjRjj
V600-DjjPjj
C200H-OV001
C200H-CN224