Table Of Contents - Viessmann VITOTRONIC 200 Installation And Service Instructions Manual

Vitotronic 200, HO1B and 300-K, MW2C Installation/Service
General
Safety
Preparing for Installation
Installation Sequence
Commissioning
Service Scans
Safety, Installation and Warranty Requirements..............2
Product Information.....................................................2
About these Instructions.............................................5
For your Safety..........................................................6
System Example....................................................7
Installation information for the Vitotronic 200................8
Installing a Cascade Communication Module -
Vitodens 200-W.........................................................8
Preparing Boilers for Cascade Mode - Vitodens 200-W....9
Preparing Boilers for Cascade Mode - Vitocrossal
300 CU3A...............................................................12
Configure Boilers for Cascade Mode............................14
Overview of Electrical Connections, Vitotronic 300-K...........15
Inserting the LON Communication Module....................17
Mounting the Control Unit.........................................17
Inserting Cables/Leads and Applying Strain Relief.........18
Connecting Sensors.................................................18
Connecting Pumps....................................................19
120V External Connection.........................................20
Connecting Actuators................................................21
Connecting the Central Fault Message Facility..............22
External Blocking via Switching Contact......................22
External Demand via 0-10V Input................................23
External Blocking via Switching Contact......................23
External "Mixing Valve Closed"/"Mixing Valve Open"...24
External Heating Program Changeover".......................24
Making the LON Connection.......................................25
Power Supply...........................................................27
Fitting the Control Unit Front......................................28
Opening the Control Unit...........................................29
Changing the Language..............................................30
Matching Coding Addresses to the Installed Heating
System...................................................................30
Selecting the Boiler Sequence (if required)....................31
Connecting the Control Unit to the LON System...........31
Testing Actuators on the Vitotronic 200......................35
Scanning Operating Details at the Vitotronic 200..........36
Testing Actuators and Sensors on the Vitotronic 300-K....36
Adjusting the Heating Curve.......................................37
Calling up the Service Level - Vitotronic 200................39
Leaving the Service Level - Vitotronic 200...................39
Scanning Operating Data - Vitotronic 200....................40
Brief Scan - Vitotronic 200........................................40
Calling up the Service Menu - Vitotronic 300-K............41
Leaving the Service Menu - Vitotronic 300-K...............42
Change Passwords - Vitotronic 300-K.........................42
Resetting all Passwords to their Factory Set Condition -
Vitotronic 300-K.......................................................42
Scanning Operating Data - Vitotronic 300-K.................43
Resetting Operating Data - Vitotronic 300-K.................43
Brief Scan - Vitotronic 300-K......................................44
Maintenance Display.................................................45

Table of Contents

Page
3