Ricoh SP 320DN User Manual page 99

Problem
Images smudge when rubbed.
(Toner is not fixed.)
When printing graphics, the output
and the screen are different.
Images are cut off, or excess is
printed.
Photo images are coarse.
A solid line is printed as a dashed
line or appears blurred.
Fine lines are fuzzy, of inconsistent
thickness, or do not appear.
On the printer driver's [Paper] tab, select a proper paper type
in the [Paper Type:] list.
To print accurately, specify the printer driver setting to print
without using the graphics command. For details about
specifying the printer driver setting, see the printer driver Help.
Use the same size paper selected in the application. If you
cannot load paper of the correct size, use the reduction
function to reduce the image, and then print. For details about
the reduction function, see the printer driver Help.
Use the application's or printer driver's settings to specify a
higher resolution.
For details about the printer driver's settings, see the printer
driver Help.
Change the dithering settings on the printer driver. For details
about the dithering settings, see the printer driver Help.
Change the dithering settings on the printer driver. For details
about the dithering settings, see the printer driver Help.
If the problem persists, specify the settings of the application in
which the image was created to change the thickness of the
lines.
Print Quality Problems
Solution
97