Initial Setting - Pentax R-422VN Instruction Manual

8.11 Initial setting 4

1. Selection of Temperature unit setting: [TEMP. UNIT]
Select °C or °F as the unit for Temperature.
2. Selection of Pressure unit setting: [PRESS UNIT]
Select hPa (hectopascal), mmHg, inchHg as the unit for
pressure to be input.
3. Selection of Distance unit setting: [DIST. UNIT]
Select m or ft or ft+inch as the unit for Distance.
4. Selection of Angle unit setting: [ANG. UNIT]
Select DEG or DEC or GRD or MIL as the unit for Angle.
8.12 Initial setting 5
1. Selection of Transfer rate (baud rate): [BAUD UNIT]
Select a baud rate of 1200, 2400, 4800 or 9600.
2. Selection of Data bits: [DATA LENGTH]
Select a data length of 8 bits.
3. Selection of Parity: [PARITY BITS]
Select no (NIL) parity bit, even parity or odd parity.
4. Selection of Stop bits: [STOP BITS]
Select the number of stop bits to be used: 1 or 2.
48
X1.ﾟ
CXXXXXXXXXX
2.ﾟF
X1. hPa XXXXX
2. mmHG
3.inchHG
X1.m XXXXX
2.ft
3.ft+inch
X1.DEG XXX
2.DEC
3.GRD
4.MIL
X1.1200 XXX
2.2400
3.4800
4.9600
X1.8XXXXXXXXX
XXX
X1.NIL XXXXX
2.EVEN
3.ODD
X1.1
XaXXXXXX
2.2