Philips DVDR 80 Owner's Manual page 76

1
Switch on the TV and, if required, select the channel number for
the DVD Recorder (channel 3 or 4 or Audio/Video In channel).
2
Insert a disc to be used for the recording. The system and
content of the disc will be checked. '
display.
a
b A DVD+RW was inserted that already contains recordings. Use
A
and
be started.
a
b The inserted DVD is empty.
a
b The inserted disc is a DVD+RW whose contents are not compatible
with DVD Video (e.g. a data disc). This disc cannot be used for
recordings until
n button.
a
b A disc can only contain a max. of 48 titles (including the empty titles).
Erase the titles or change the disc.
3
If necessary, switch to TV programming by pressing the
button on the remote.
4
Use A
or
record. The following will appear on the display:
SVHS jack (Y/C)
Audio jack
Switching between jack
automatically. In case both jacks are occupied, the signal at jack
Component Video jacks on the back
, Audio jacks
SVHS-/Audio front jacks
Video/Audio front jacks A/V
Switching
automatically. In case both jacks are occupied, the signal at jack
Digital video (i.Link) front jack
' will appear on the
B to select a location where the recording should
the entire disc is erased
B to select the channel you want to
Video jack (CVBS)
for SVHS-jack and Video jack.
and
is given priority.
for Component Video
/
/
between jack and
is given priority.
using the
,
is done
is done
Recording