Philips DVDR 80 Owner's Manual page 42

This function uses the information sent via the local PBS channel to automatically set the
time/date. For this reason, you must enter the PBS channel that sends this additional information.
When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is wrong,
you must manually set the date/time (see section 'Manually setting the time & date').
If data from the GUIDE PLus+
this information was taken from the GUIDE Plus+
function.
1
Press
will appear.
2 ' using D or C .
Select '
3
Select line '
with C .
4
Select line '
with C .
5
Select '
C .
a
b The time/date will automatically be taken from the EPG information.
Therefore you can not set the time/date manually.
6
Select the corresponding line with
7
Select the channel which sends the time/date information in the
line '
will check whether or not the information transfer is possible.
a
b No time/date data can be received from this TV channel.
Select a different channel or '
8
Select one of the following settings in line '
' ': The time set corresponds to summer time (summer time
activated)
' ': The time set corresponds to the winter time (summer time
is off)
® system were loaded, you can not change the clock/date because
® system. Therefore you can not select this
on the remote control. The menu bar
B or A
' using
B or A
' using
B or A
' with
B or A
' and confirm with . The DVD Recorder
' in line '
and confirm
and confirm
and confirm with
.
'.
':
Installing your DVD Recorder