Philips DVDR 80 Owner's Manual page 46

3
Press A
. Select then '
B , A
Use
Confirm with
4
B , A
Use
5
Confirm with
Use A
,
6
Confirm with
7
Enter the postal/zip code where the DVD Recorder is being set
up.
For the GUIDE Plus+
current location and the TV channels available at that location. The DVD
Recorder works this out automatically on the basis of the postal/zip
code and country.
8
Confirm with
9
Does your TV have an antenna or a cable connection?
The difference is that they have different channel line up's. In the antenna
setting, only channels from 2 to 69 can be entered. In the cable setting,
however, channels 1 to 125 can be entered.
10
Confirm with
If you selected '
need to do here. Read on in the section entitled 'Finalize set-up'.
Otherwise, you should continue here.
11
Did you connect an external cable box to your DVD Recorder?
: External cable box
: Connection to a cable network.
12
Confirm with
If you selected '
Read on in the section entitled 'Finalize set-up'.
Otherwise, you should continue here.
13
If you connected the cable box to the DVD Recorder only via
the antenna cable, select the channel number on which the cable
box is transmitting (usually channel 3).
If the cable box is connected via the Video/Audio or S-Video jack,
select the relevant input jack of the DVD Recorder on the
screen.
An incorrect setting here may lead to poor TV reception.
14
Confirm with
' with the C or D button.
to select
.
to select
.
B to select your country.
.
®
system to operate correctly, it needs to know its
.
: Antenna
: Cable connection
.
' ' ', there is nothing else you
.
', there is nothing else you need to do here.
.
.
.
The GUIDE Plus+