Philips DVDR 80 Owner's Manual page 32

You can connect a cable box to the
on the recorder. Switching between jack
case both jacks are occupied, the signal at jack
The antenna cable should also be connected to the cable box and the DVD-Recorder as shown
above.
Connect the DVD-Recorder
or
device in between, there can be distortions in the TV pictures from the built in 'copy protection
system'.
•) The DVD-Recorder have to be directly connected to the TV set. If there are other devices
(video recorder, decoder, satellite receiver,...) in between, there can be distortions in the TV
pictures from the built in 'copy protection system'.
•) The Cable Box have to be connected
TV set). On the jack
The antenna cable should also be connected to the Cable Box and the DVD-Recorder as shown
above.
or
and
is given priority.
with your TV-set (Cable from the output jacks
directly to the TV set). If there is a video recorder or another
the DVD-Recorder (Cable Box - DVD-Recorder -
only the TV have to be connected.
and the jacks
is done automatically. In
Connecting additional devices