Philips DVDR 80 Owner's Manual page 10

: Connection for an additional
device. Audio output for component video/progressive scan
: Connection for
an additional device with component video/progressive scan output
:
:
Connection of the IR Blaster(IR extender) for a cable box.
This jack contains a 'DEMO PIN'. This enables a demonstration of the
GUIDE Plus+ ® system to be shown automatically with stored data.
Remove the Demo Pin to disable the Retail Demo feature.
The following symbols may appear on your DVD Recorder display:
Multifunction display/text line
•) Clock
•) Disc/Title play time
•) OTR time
•) Title name
•) Display of the TV channel number / playing time / function.
•) Display of information, warnings
Disc bar: Displays the current position on the disc (disc pointer).
Play/Record: single flashing segment at the current position.
Pause: flashing segment on both sides of the current position.
Stop: flashing segment at the current position.
A recording (Timer) has been programmed
Modulator is switched off. The antenna signal (RF signal) is only
connected to the TV when the modulator is switched off.
Component Video output set to 'Progressive Scan.' If this is not
displayed, the Component Video output is set to 'Interlaced.'
Remote control command has been sent