Philips DVDR 80 Owner's Manual page 27

3
Use a S-Video (SVHS) cable and plug one end into the
jack at the back of the DVD Recorder and the other end
into the S-Video (SVHS) In jack of the TV (usually called 'S-Video
in' or 'SVHS in'. See your TV's instruction manual).
4
Use an audio (cinch) cable and plug one end into the red/white
cinch jack
(next to
red/white audio input jack of the TV (usually called Audio in', 'AV
in'. See your TV's instruction manual).
5
Switch on the TV. Then switch the set to the SVHS input jack or
select the corresponding channel number. For the channel
number, please see your TV's instruction manual.
6
Your DVD-Recorder is equipped with a Retail Demo Pin inserted
in the
Demo Pin inserted, the demo about the GUIDE Plus+
automatically activated after the automatic channel search.
Remove the Demo Pin to disable the Retail Demo feature.
7
Connect the mains jack 4
Recorder with the power supply using the supplied power cable.
The most important features of the DVD Recorder will appear
on the display.
After the initial installation is completed, this function will be
switched off. How you switch on this function again, read in the
chapter 'User preferences' in the section 'Standby'.
8
Press
appear on the display.
Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD Recorder'.
Connecting the DVD Recorder
at the back of the DVD Recorder
) and the other into the corresponding
jack at the back . On the retail floor with the
at the back of the DVD
m on the recorder. '
® system is
' will