Table of Contents
Advertisement
Mounting OS6855-14 and OS6855-U10 Switches
Installation
1
To wall mount the switch, follow steps 1 through 7 in the
U10 Switches"
section above.
2
Use one person to securely hold the chassis assembly in position on the wall. Mark the location of the
holes in the mounting brackets on the wall.
3
Pre-drill the wall (if required).
Wall surface
Note. Wall fasteners are not provided with your switch and will vary depending on the type of wall
surface. Be sure to use fasteners that are approved for the full weight of the chassis assembly. Consult
fastener specifications for full details.
4
Secure the unit to the wall using appropriate wall fasteners.
OmniSwitch 6855 Series Hardware Users Guide
Recommended Wall Mount Chassis Orientation
March 2009
Wall-Mounting OS6855-14 and OS6855-U10 Switches
"Table-Mounting OS6855-14 and OS6855-
Chassis assembly
NOTE: For wall mounting, it is recommended that the
chassis assembly is oriented sideways, with the chassis
front panel facing left, as shown in the diagram below.
Power supply
page 4-21
Hide quick links:
Advertisement
Table of Contents
