Olivetti d-Copia 3500MF Service Manual page 169

Item No.
U240
Eject Unlock(Full)
Punch
Punch Move
Method: [Solenoid]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Sub Tray
Save Drum
Booklet
Punch
Three Fold
Method: [Mail Box]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Display
Conv
Branch
Method: [Booklet]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Folding
Blade
Bundle Up
Bundle Down
Staple
Width Test(A3)
Width Test(LD)
Feed In
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y113350-5
Display
DF eject release motor (DFERM) full-open drive position
Punch motor (PUM) is turned on
Punch slide motor (PUSLM) is turned on
Display
DF feedshift solenoid (DFFSSOL) is turned on
DF drum solenoid (DFDRSOL) is turned on
DF center fold solenoid (DFCFSOL) is turned on
Punch solenoid (PUSOL) is turned on
CF feedshift solenoid (CFFSSOL) is turned on
Mailbox drive motor (MBDM) is turned on at paper conveying
Mailbox drive motor (MBDM) is turned on at feedshift operation
Display
CF main motor (CFMM) is turned on
CF blade motor (CFBM) is turned on
CF adjustment motor 2 (CFADM2) is turned on
CF adjustment motor 1 (CFADM1) is turned on
CF staple motor (CFSTM) is turned on
CF side registration motor 1, 2 (CFSRM1, 2) is turned on
CF side registration motor 1, 2 (CFSRM1, 2) is turned on
CF paper entry motor (CFPEM) is turned on
Description
Description
Description
Description
Description
1-3-107
2LL/2LJ/2LH
Sevice Manual