Olivetti d-Copia 3500MF Service Manual page 107

Item No.
U059 Setting fan mode
Description
Specifies mode for paper conveying fan motors during conveying paper.
Purpose
Change mode if paper crease occurs.
Method
1. Press the start key.
2. Select the mode.
Fan Mode
Cooling Mode
Setting: [Fan Mode]
1. Select the mode.
Display
Mode1
Mode2
Mode3
Auto
Initial setting: Mode1
2. Press the start key. The setting is set.
Setting: [Cooling Mode]
1. Change the setting value using the +/- keys.
Display
Cooling Mode
A larger value advances the operating timing, and a smaller value slows it.
2. Press the start key. The value is set.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
Y113350-5
Display
Sets temperature at which paper conveying fan motors operate.
Sets temperature at which the paper conveying fan motors are
switched for controlling.
Temperature at which paper conveying fan motors operate: High
Temperature at which paper conveying fan motors operate: Normal
Temperature at which paper conveying fan motors operate: Low
It begins with Mode2 at power up or recovery from sleep mode, and
switches to Mode3 when the thermistor detects higher than 38 °C.
Amount of shift from the initial standard
temperature
Description
Description
Description
Description
1-3-45
2LL/2LJ/2LH
Setting Initial
range setting
-3 to 3 (°C) 0
Sevice Manual