Fluke 434-II User Manual page 149

POWER
Line power
Power Adapter
input voltage
Battery power
Battery operating time
BP290 (standard
battery)
Charging time BP290
Battery operating time
BP291 (optional
battery)
Charging time BP291
Battery save
INTERFACES
USB
RS-232 Interface
Baudrate
Stop bits
Data bits
Parity
Transmission mode
Handshake
STANDARDS
Measurement methods
used
Measurement
performance
Power Quality
Flicker
Harmonics
Shipboard V/A/Hz
info@Fluke-Direct.ca
Switchable 115V, 230V adapter with country specific plug
15 ... 23 V dc; Use only Power Adapter BC430
Rechargeable Li-ion battery BP290 (installed)
6.5 hours @ normal backlight
8 hours @ dimmed backlight
10.5 hours with display off
2.5 hours to 95 % (Analyzer off)
13 hours @ normal backlight
16 hours @ dimmed backlight
21 hours with display off
5 hours to 95 % (Analyzer off)
Adjustable time for dimmed backlight
USB 2.0 slave port. Max speed 460 k. Mini-USB input connector.
Use special adapter cable DB-9 to Mini-USB to connect GPS430 Time
Synchronization Unit.
1200 ... 430 kb/s (No split baudrate available, receive and transmit baudrates
are equal. Default baudrate is 115200.)
1
8
No
Asynchronous, full duplex
Xon Xoff (Software handshake only)
nd
IEC61000-4-30 2 edition class A
Fluke 435-II/437-II IEC61000-4-30 Class A, Fluke 434-II IEC61000-4-30
Class S
EN50160
IEC 61000-4-15
IEC 61000-4-7
MIL-STD-1399-300B
Fluke-Direct
Specifications
Electrical Measurements
.ca
1.800.868.7495
27
27-11