Fluke 434-II User Manual page 11

See explanation in
manual
Earth
Alternating Current
Safety Approval
Current Clamp
To avoid electrical shock or fire:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
info@Fluke-Direct.ca
Li-Ion
Review the entire manual before use of the Analyzer and its
accessories.
Carefully read all instructions.
Do not work alone.
Do not use the product around explosive gas, vapor, or in
damp or wet environments.
Use the product only as specified, or the protection supplied
by the product can be compromised.
Use only insulated current probes, test leads and adapters as
supplied with the Analyzer, or indicated as suitable for the
Fluke 434-II/435-II/437-II Analyzer.
Keep fingers behind the finger guards on the probes.
Before use, inspect the Analyzer, voltage probes, test leads
and accessories for mechanical damage and replace when
damaged. Look for cracks or missing plastic. Pay special
attention to the insulation surrounding the connectors.
Verify the Analyzer's operation by measuring a known voltage.
Remove all probes, test leads and accessories that are not in
use.
Always connect the Power Adapter first to the AC outlet before
connecting it to the Analyzer.
Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
Use the ground input only to ground the Analyzer and do not
apply any voltage.
Do not apply input voltages above the rating of the instrument.
Do not apply voltages in excess of the marked ratings of the
voltage probes or current clamps.
Fluke-Direct
Direct Current
Double Insulation
(Protection Class)
Recycling information
Conforms to relevant
Australian standards
Do not apply around or
remove from hazardous
live conductors.
Warning
General Aspects
Safety Information: Read First
Safety Approval
Conformité Européenne
Disposal information
RoHS China
Do no dispose of this
product as unsorted
municipal waste. Go to
Fluke's website for
recycling information
.ca
1.800.868.7495
1
1-5