Fluke 434-II User Manual page 141

CROSS TALK
Between V inputs
Voltage to current input
COMMON MODE REJECTION RATIO (CMRR)
CMRR
DISPLAY MODES
Waveform display
Phasor
Meter readings
Trend graph
Bar graph
Event list
info@Fluke-Direct.ca
-60 dB @ Fnominal
-95 dB @ Fnominal (Amps Scaling: x1 AC+DC)
>60 dB
Available in all modes via SCOPE key.
Default display mode for Transients function
Update rate 5x per second
Displays 4 cycles of waveform data on screen, up to 4 waveforms
simultaneously
Available in all modes via Scope waveform display
Default view for Unbalance mode
Available in all modes except Monitor, provides tabulated view of all available
readings
Fully customizable up to 150 readings for Logger mode
Available in all modes except Transients
Single vertical cursor with min max and average reading at cursor position
Available in Monitor and Harmonics mode
Available in all modes
1
Provides 50/60 cycles of waveform information and associated ½ cycle rms
values for Volts and Amps
Fluke-Direct
Specifications
Electrical Measurements
.ca
1.800.868.7495
27
27-3