Fluke 434-II User Manual page 128

Fluke 434-II/435-II/437-II
Users Manual
Limits Adjustments is used to save, recall, and define sets of limits for:
The entry menu is available in the selected information language.
Read below how to do this:
24-14
info@Fluke-Direct.ca
•
Power Quality Monitoring (Monitor).
•
Event capture levels for Dips/Interruptions/Rapid Voltage Changes/Swells.
Adjust Limits is the entry menu. It shows the main settings of the active
1
set of limits: name, creation date, and a summary of limits data.
Recall Limits menu is used to recall a set of power quality limits:
2
- EN50160 is a factory installed read-only set of limits.
- User definable sets of limits can be stored. They can be recalled
afterwards. As a basis you may use EN50160 and edit it to the desired
set of limits. Use the up/down arrow keys to select a set of limits you
want to recall. Then press Function key F5 to recall and to use them.
Press Function key F1 to leave the menu without further actions.
Edit Limits menu is used to modify limits. Setups are grouped per
3
power quality item in separate submenus for voltage, harmonics,
flicker, etc.
Use the up/down arrow keys to select an item to be adjusted. Then press
the ENTER key to enter the adjustment submenu. All adjustment items
are listed in the table below.
Use the arrow keys to select and edit limits.
4
Press Function key F5 to confirm selections and return to the Edit
Limits menu. Use Function keys F1 – PREVious or F2 – NEXT to
move directly to an adjacent submenu. When ready with editing the
limits, Press Function key F5 – OK twice to return to the Adjust
Monitor Limits menu. Arrow keys can be used here to define a name
for the new set of limits. Then press Function key F2 – SAVE to enter
the Save Monitor Limits menu.
Save Limits menu is used to save sets of limits under a user definable
5
file name. The file name is selected with the arrow keys: the up/down
keys to select a character and the left/right keys to define the character
position. When done press ENTER to save the limits. Press F5 – BACK
to return to the Adjust Monitor Limits menu without saving limits.
View Limits menu. This menu has the same structure as the Edit
6
Monitor Limits menu and can be used to view limits without the risk of
changing them. Use F1 – PREVious and F2 – NEXT to select all sets of
limits.
Press Function key F5 – BACK to return to the MANUAL SETUP
7
menu.
Fluke-Direct
.ca
1.800.868.7495