Setting The Mechanical Stitch Adjustment; Setting The Stitch Regulator Gear - DURKOPP ADLER 867-M PREMIUM Service Instruction

7

7.1 Setting the stitch regulator gear

Proper setting
The stitch regulator gear is set to 0.
 No play on the stitch regulator gear. The plates for the gear are paral-
Cover
Fig. 20: Setting the mechanical stitch adjustment (1)
(1) - Frame of the stitch regulator gear
(2) - Plates of the stitch regulator gear
(3) - Hole
To set the stitch regulator gear:
1. Switch off the machine.
2. Remove the tension spring (4).
3. Loosen the screw (5).
32

Setting the mechanical stitch adjustment

WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set the mechanical
stitch adjustment.
lel; the frame cannot be moved.
• Tilting the machine head ( p. 16)
• Removing the valve cover ( p. 19)
①
②
Setting the mechanical stitch adjustment
③ ④ ⑤
(4) - Tension spring
(5) - Screw
(6) - Lever
Service Instructions 867-M PREMIUM - 02.0 - 02/2017
⑥