Table of Contents
Advertisement
7
7.1 Setting the stitch regulator gear
Proper setting
The stitch regulator gear is set to 0.
No play on the stitch regulator gear. The plates for the gear are
Cover
To set the stitch regulator gear:
1. Switch off the machine.
2. Remove the lower cover on the side.
Fig. 19: Setting the mechanical stitch adjustment (1)
(1) - Tension spring
3. Remove the tension spring (1).
32
Setting the mechanical stitch adjustment
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set the
mechanical stitch adjustment.
parallel; the frame cannot be moved.
• Tilt the machine head ( p. 18)
• Remove the valve cover ( p. 20)
Setting the mechanical stitch adjustment
Service Instructions 869-M PREMIUM - 00.0 - 07/2018
①
Advertisement
Table of Contents
