Percent-Rate Support - Alcatel-Lucent 7450 Quality Of Service Manual

...
#------------------------------------------
A:ALA-7>config>qos#

Percent-Rate Support

The percent-rate command is supported for pir and cir parameters for both queues and
policers. Also supported is the capability of specifying the rate as a percentage value of the
line rate for sap-ingress and sap-egress qos policies. It is supported for both queues and
policers. The user has the option of specifying percent-rate for pir and cir parameters. For
pir, the range is 0.01 to 100.00, and for cir, the range is 0.00 to 100.00.
The rate can be also configured using the existing keyword rate in Kbps.
For queues, when the queue rate is in percent-rate either a local-limit or a port-limit can be
applied.
When the local-limit is used the percent-rate is relative to the queue's parent scheduler rate
or the agg-rate rate at egress, when the port-limit is used the percent-rate is relative to the rate
of the port (including the ingress-rate/egress-rate setting) to which the queue is attached. port-
limit is the default.
For policers, the percent-rate rate is always relative to the immediate parent root policer/
arbiter rate or the FP capacity.
SAP Ingress QoS Policy:
Quality of Service Guide
parent VPN_be
rate 11000
exit
queue 22 multipoint create
parent VPN_priority
rate 11000
exit
queue 23 multipoint create
parent VPN_reserved
rate 1
exit
queue 25 multipoint create
parent VPN_video
rate 1500 cir 1500
exit
queue 26 multipoint create
parent VPN_voice
rate 2500 cir 2500
exit
queue 27 multipoint create
parent VPN_nc
rate 100 cir 36
exit
Service Egress and Ingress QoS Policies
209