In This Section
This section provides information to configure network queue QoS policies using the
command line interface.
Topics in this section include:
Overview
Network queue policies define the ingress network queuing at the XMAMDA network node
level. Network queue policies are also used at the Ethernet port and SONET/SDH path level
to define network egress queuing.
There is one default network queue policy. Each policy can have up to 16 queues (unicast and
multicast). The default policies can be copied but they cannot be deleted or modified. The
default policy is identified as network-queue default. Default network queue policies are
applied to XMA/MDA network ingress ports. You must explicitly create and then associate
other network queue QoS policies.
For information about the tasks and commands necessary to access the command line
interface and to configure and maintain your devices, refer to CLI Usage chapter in the Basic
System Configuration Guide.
Quality of Service Guide
Network Queue QoS Policies
•
Overview
•
Basic Configurations
•
Default Network Queue Policy Values
•
Service Management Tasks
147