Dot1P Egress Remarking - Alcatel-Lucent 7450 Quality Of Service Manual

DSCP EF Traffic
Other Traffic
The configuration would be as follows:

Dot1p Egress Remarking

Dot1p marking can be performed on egress for all services and with respect to the profile of
the packet and the VLAN tag.
The following commands can be used to remark the dot1p values at a SAP egress:
CLI Syntax:
Quality of Service Guide
Figure 13: Egress SAP
Policer 1
FC=BE
sap-egress 10 create
queue 1 create
exit
policer 1 create
exit
ip-criteria
entry 10 create
match
dscp ef
exit
action policer 1
exit
exit
exit
sap-egress policy-id create
fc fc-name create
dot1p {dot1p-value | in-profile dot1p-value out-
profile dot1p-value [exceed-profile dot1p-value]}
dot1p-inner {dot1p-value | in-profile dot1p-value
out-profile dot1p-value}
dot1p-outer {dot1p-value | in-profile dot1p-value
out-profile dot1p-value [exceed-profile dot1p-
value]}
Service Egress and Ingress QoS Policies
policer-output-queues
queue-group
queue 1
al_0617
199