Deleting Qos Policies; Remove A Policy From The Qos Configuration - Alcatel-Lucent 7450 Quality Of Service Manual

...
---------------------------------------------
A:ALA-7>config>qos#

Deleting QoS Policies

Every service SAP is associated, by default, with the appropriate egress or ingress policy
(policy-id 1). You can replace the default policy with a customer-configured policy, but you
cannot entirely remove the policy from the SAP configuration. When you remove a non-
default service egress or ingress policy, the association reverts to the default policy-id 1.
A QoS policy cannot be deleted until it is removed from all SAPs where they are applied.
A:ALA-7>config>qos# no sap-ingress 100
MINOR: CLI SAP ingress policy "100" cannot be removed because it is in use.
A:ALA-7>config>qos#

Remove a Policy from the QoS Configuration

CLI Syntax:
Example:
Quality of Service Guide
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
config>qos# no sap-ingress policy-id
config>qos# no sap-ingress 100
config>qos# no sap-egress 1010
Service Egress and Ingress QoS Policies
221