Alcatel-Lucent 7450 Quality Of Service Manual page 33

If the following SAP egress QoS policy is applied to SAP on an FP with the egress WRED
megapool enabled:
the details of both the megapool and queue pool usages can then be shown using this
command (detailed version):
*A:PE# show megapools 2 fp 1 wred service-id 1 detail
===============================================================================
MegaPool Information
===============================================================================
Slot
Application
Resv CBS
-------------------------------------------------------------------------------
Utilization
-------------------------------------------------------------------------------
High-Slope
Low-Slope
Exceed-Slope
Time Avg Factor
Pool Total
Pool Shared
Pool Total In Use
Pool Shared In Use
WA Shared In Use
Hi-Slope Drop Prob
Excd-Slope Drop Prob : 0
===============================================================================
Queue : 1->2/1/2:1->1
===============================================================================
FC Map
Admin PIR
Admin CIR
Admin MBS
Hi Prio Only
CBS
Slope
WRED Mode
Time Avg Factor
-------------------------------------------------------------------------------
High Slope Information
-------------------------------------------------------------------------------
Quality of Service Guide
• In profile maps to the high slope.
• Out of profile maps to the low slope.
• Exceed profile maps to the exceed slope.
sap-egress 10 create
queue 1 create
wred-queue policy "slope1" mode pool-per-queue
exit
exit
: 2
: Egress
: 25%
: 7
: 476160 KB
: 353280 KB
: 0 KB
: 0 KB
: 0 KB
: 0
: be l2 af l1 h2 ef h1 nc
: 10000000
: 0
: 12240 KB
: not-applicable
: 0 KB
: slope1
: pool-per-queue
: 7
slope-usage default
Pool Name
State Start-Avg
Down 70%
Down 50%
Down 30%
Pool Resv
Pool Resv In Use
Lo-Slope Drop Prob : 0
Oper PIR
Oper CIR
Oper MBS
Hi Low Prio Only : not-applicable
Depth
Slope Usage
QoS Policies
: wred
Max-Avg Max-Prob
90% 80%
75% 80%
55% 80%
: 122880 KB
: 0 KB
: Max
: 0
: 12240 KB
: 0
: default
33