Configuring Throttle Rate - Alcatel-Lucent 7210 SAS E OS System Management Manual

Configuring Throttle Rate

This command configures the number of events and interval length to be applied to all event types
that have throttling enabled by the event-control command.
Use the following CLI syntax to configure the throttle rate.
CLI Syntax: config>log#
The following displays a throttle rate configuration example:
*A:gal171>config>log# info
---------------------------------------------
----------------------------------------------
*A:gal171>config>log#
7210 SAS-E OS System Management Guide
throttle-rate events [interval seconds]
throttle-rate 500 interval 10
event-control "aps" 2001 generate throttle
Event and Accounting Logs
Page 227