Service Egress Qos Queue; Percent-Rate Support - Alcatel-Lucent 7450 Quality Of Service Manual

Service Egress QoS Policy
A:ALA-7>config>qos#

Service Egress QoS Queue

To create a service egress queue parameters, define the following:
The following displays an egress QoS policy configuration:
A:ALA-7>config>qos# info
--------------------------------------------------
...
...
------------------------------------------------
A:ALA-7>config>qos#

Percent-Rate Support

The percent-rate command is supported for pir and cir parameters for both queues and
policers. Also supported is the capability of specifying the rate as a percentage value of the
line rate for sap-ingress and sap-egress qos policies. It is supported for both queues and
policers. The user has the option of specifying percent-rate for pir and cir parameters. For
pir, the range is 0.01 to 100.00, and for cir, the range is 0.00 to 100.00.
The rate can be also configured using the existing keyword rate in Kbps.
For queues, when the queue rate is in percent-rate either a local-limit or a port-limit can be
applied.
192
• A new queue ID value. The system will not dynamically assign a value.
• Define queue parameters. Egress queues support explicit and auto-expedite hardware
queue scheduling, and parent virtual scheduler definition.
sap-egress 105 create
description "SAP egress policy"
queue 1 create
parent "scheduler-tier1"
exit
queue 2 create
exit
queue 3 expedite create
parent "test1"
exit
fc af create
queue 1
exit
fc ef create
exit
exit
Quality of Service Guide