Alcatel-Lucent 7450 Quality Of Service Manual page 443

Description This command creates a queue for use in a queue group template. Once created, the defined queue-id
acts as a repository for the default parameters for the queue. The template queue is created on each
queue-group object which is created with the queue group template name. Each queue is identified
within the template by a queue-id number. The template ensures that all queue groups created with the
template name will have the same queue-ids providing a uniform structure for the forwarding class
redirection commands in the SAP egress QoS policies. The parameters within the template queue will
be used as the default settings for each queue in the actual queue group. The queue parameters may be
individually changed for each queue in each queue group using per queue overrides.
The no form of the command
Default none
adaptation-rule
Syntax adaptation-rule [pir adaptation-rule] [cir adaptation-rule]
no adaptation-rule
Context config>qos>qgrpid>egr>qgrp>queue
config>qos>qgrpid>ing>qgrp>queue
config>qos>qgrpid>ing>qgrp>policer
Description This command defines the method used by the system to derive the operational CIR and PIR settings
when the queue is provisioned in hardware. For the CIR and PIR parameters individually, the system
attempts to find the best operational rate depending on the defined constraint.
The no form of the command removes any explicitly defined constraints used to derive the operational
CIR and PIR created by the application of the policy. When a specific adaptation-rule is removed,
the default constraints for rate and cir apply.
Default adaptation-rule pir closest cir closest
Parameters pir — Defines the constraints enforced when adapting the PIR rate defined within the queue
cir — Defines the constraints enforced when adapting the CIR rate defined within the queue
adaptation-rule — Specifies the adaptation rule to be used while computing the operational CIR
Quality of Service Guide
queue-id rate command. The pir parameter requires a qualifier that defines the constraint
used when deriving the operational PIR for the queue. When the rate command is not
specified, the default applies.
queue-id rate command. The cir parameter requires a qualifier that defines the constraint
used when deriving the operational CIR for the queue. When the cir parameter is not
specified, the default constraint applies.
or PIR value.
Values max — The max (maximum) option is mutually exclusive with
the min and closest options. When max is defined, the operational
PIR for the queue will be equal to or less than the administrative
rate specified using the rate command.
Queue Sharing and Redirection
443